Articles by Hannah Sundermeyer
Published on: December 03, 2020
While the market for industrial cranes is facing similar challenges as the rest of the equipment industry, OEMs and end-users are optimistic.
Published on: November 24, 2020
With an abundance of rigging products on the market, one of the important decisions that riggers are faced with is choosing between wire or synthetic rope
Published on: November 17, 2020
ACT rounds up three industry experts to talk money, used equipment and fleet expansion in today’s marketplace.
Published on: November 05, 2020
The 882-ton capacity LR 1800-1.0 lattice boom crawler crane passes 1,102-ton test with new heavy duty hook block, boom head and ballast trailer
Published on: November 02, 2020
The TC65159 will feature a 65-ton base rating and 5-section 159-foot, full power, proportionally extended boom with 168-foot tip height
Published on: November 02, 2020
Prometheus Construction welded and lifted two copper sculptures for the Kalanihoʻokaha Cope Community Learning Center
Published on: October 14, 2020
Mountain Crane completes a bridge replacement along on Idaho’s Snake River
Published on: October 13, 2020
Trans American Trucking completed an impressive Pennsylvania hauling project
Published on: October 13, 2020
A gathering of the tower crane industry’s key players, the Tower Cranes North America online event will take place on October 22
Published on: September 30, 2020
Thomas Heidrich has joined Wolffkran as its new chief technical officer
Published on: September 29, 2020
NessCampbell faced steep grades and winter weather during a transformer haul
Published on: August 05, 2020
Barry L. Pennypacker to step down as Aaron H. Ravenscroft is appointed president and CEO of Manitowoc, effective immediately
Published on: July 21, 2020
Four industry experts discuss load securement dos and don’ts and their latest innovations
Published on: July 21, 2020
The latest product round-up of load moment indicator technology and rated capacity indicators
Published on: June 16, 2020
The company’s GRT9165 has been utilized for work on wind turbines and the construction of a large parking garage
Published on: June 10, 2020
Remote control and automation technology enhance operator confidence and safety.
Published on: June 10, 2020
Self-erectors bring versatility, efficiency and cost effectiveness to jobsites while providing out-of-the-box lifting solutions.
Published on: June 02, 2020
Dale Johnson has been appointed parts manager for Cropac Equipment’s Western Division.
Published on: May 29, 2020
The Caldwell Group provided a 75 foot-long, 50,000-pound capacity beam for lifting 60 rebar cages at a highway project in Pennsylvania.
Published on: May 20, 2020
Eight Potain tower cranes are being utilized for a nine million square foot Florida development project.